Protect Level - Omron E5AN-H User Manual

Protect Level

5-2

Protect Level

Power ON
Operation Level
PID Setting
Level
Control in Progress
Four levels of protection are provided on the E5CN-H, operation/adjustment
protect, initial setting/ communications protect, setting change protect, and PF
key protect (PF Key protect is supported for the E5AN-H and E5EN-H only).
These protect levels prevent unwanted operation of the keys on the front
panel in varying degrees.
Adjustment
Level
Press the O Key
for at least 1 s.
Bank Setting
Level
To move from the operation level to the protect level, press O and M Keys for
three seconds (see note) or more.
Note The time taken to move to the protect level can be adjusted by changing the
Move to Protect Level Time parameter setting.
Protect Level
Move to Protect Level
pmov
Displayed only when a password
0
is set.
M
Operation/Adjustment
oapt
Protect
0
M
icpt Initial Setting/
Communications Protect
0
M
Setting Change Protect
wtpt
off
M
PF Key Protect
pfpt
off
M
Parameter Mask Enable
pmsk
on
M
Password to Move to
prlp
Protect Level
0
M
Parameters that are protected will not be displayed and their settings cannot
be changed.
C
25.0
Press the O + M
Keys for at least 1 s.
Protect
Level
Page
172
172
172
173
173
173
174
Section 5-2
Press the O + M keys;
display will flash.
100.0
Press the O + M Keys
for at least 3 s. (See
note.)
Note The time to press the Key
can be changed using the
Move to Protect Level
Time parameter.
171