Communications Setting Level; Communications Data Length (Len); Communications Stop Bit (Sbit); Communications Parity (Prty) - Omron E5ZN Operation Manual

Communications Setting Level

7-7

Communications Setting Level

7-7-1 Communications Data Length (len
Function
Communications
Settings
7-7-2 Communications Stop Bit (sbit
Function
Communications
Settings
7-7-3 Communications Parity (prty
Function
Communications
Settings
Setting changes to "communications data length" must be enabled by execut-
ing a software reset or by turning ON the power again.
ch
Shared C3
00000007H to 00000008H (7 or 8)
sbit)
sbit sbit
Setting changes to "communications stop bit" must be enabled by executing a
software reset or by turning ON the power again.
ch
Shared C3
00000001H to 00000002H (1 or 2)
prty) prty prty
Setting changes to "communications parity" must be enabled by executing a
software reset or by turning ON the power again.
ch
Shared C3
00000000H to 00000002H
00000000H (0): None (none)
00000001H (1): Even (eUen)
00000002H (2): Odd (odd)
len) len len
Variable type
Setting range
Variable type
Setting range
Variable type
Setting range
Section 7-7
Address
0013 or 0113
Unit Default
Bit 7
Address
0014 or 0114
Unit Default
Bit 2
Address
0015 or 0115
Unit Default
- 1: Even
145