Omron E5AN-H User Manual page 236

Bank Setting Level
*.sok Bank Soak Time
Function
Setting
See
See
*.wtb Bank Wait Band
Function
Setting
See
See
These parameters set the soak time for each bank.
• These parameters set the time for the control operation in each bank
when using the simple program function
• When the bank function is enabled, this parameter is enabled when the
current bank program pattern is not set to OFF.
Setting range
0 to 9999
■ Related Parameters
Program start, Soak time remain (operation level): Page 184
Bank (*) wait band (bank setting level): Page 215
Program pattern (initial setting level): Page 229
Soak time unit (advanced function setting level): Page 266
These parameters set the wait band for each bank.
• These parameters set the stable band, in each bank, within which the
soak time is measured for the simple program function.
• When the bank function is enabled, this parameter is enabled when the
current bank program pattern is not set to OFF.
Setting range
Temperature: OFF,
0.1 to 3,240.0
Analog: OFF, 0.01 to
99.99
■ Related Parameters
Program start, Soak time remain (operation level): Page 184
Bank (*) soak time (bank setting level): Page 215
Program pattern (initial setting level): Page 229
Soak time unit (advanced function setting level): Page 266
The Program Pattern parameter
must not be set to OFF.
Unit Default
min or h 1
The Program Pattern parameter
must not be set to OFF.
Unit Default
°C or °F
off
%FS
Section 5-5
215