Omron E5AN-H User Manual page 274

Advanced Function Setting Level
colr
PV Change Color
Function
Mode
Constant
Setting
Linked to
alarm 1
Use the PV color change function to change the color of the PV display (No. 1
display).
There are three display colors, orange, red, and green, and you can select
from the following three modes and eight types.
• Constant: This mode displays orange, red, or green all the time.
• Linked to Alarm 1: This mode switches the PV display color from red to
green when alarm 1 turns ON or from green to red when alarm 1 turns
ON.
• Linked to PV stable band: This mode switches the PV display color
between red outside the PV stable band and green within PV stable band,
or between green outside the PV stable band and red within PV stable
band. Set the PV stable band in the PV Stable Band parameter in the
advanced function setting level.
• The default is red (red).
The following table shows the display functions that can be set using the PV
color change function.
Setting Function
org
Orange Constant: Orange
red
Red Constant: Red
grn
Green Constant: Green
ALM1 ON
r-g
Red to Red
Green
g-r
Green to Green
Red
PV change color
Alarm
value
ON
OFF
SP
ALM1
OFF
Green
Red
Section 5-10
Application example
To match the display color
with other Controller models
To match the display color
with other Controller models
To match the display color
with other Controller models
ALM1 ON
PV
Application example
To display the PV reached
signal
To display error signals
253