4.3 The Drive and Programming Modes
Using Input Terminals S1 through S8 to Switch between LO/RE
■
The user can also switch between LOCAL and REMOTE modes using one of the digital input terminals S1 through S8
(set the corresponding parameter H1-
to "1").
When setting the multi-function input terminals,
Note: 1.
Refer to Parameter Table on page 400
for a list of digital input selections.
2. Setting H1-
to 1 disables the LO/RE key on the digital operator.
4
YASKAWA ELECTRIC SIEP C710616 27C YASKAWA AC Drive A1000 Technical Manual
97