Agilent Technologies 8590 Series Service Manual page 571

R
ELATED
CAL STORE Calibration Store
D
If the correction factors are not stored, they will be lost when the
CAUTION
analyzer is turned off.
R
ELATED
Chapter 13
Note that the
before running the
response correction constants must also be generated
whenever the
CAL MXR adjustment routine in
instructions on the use of the
routines.
Once the
bias-current value for each frequency band is displayed.
The displayed values are the mixer bias DAC setting
multiplied by 16. The DAC values are automatically
stored as correction constants in nonvolatile memory on
the A16 processor/video assembly.
S
CAL YTF
OFTKEYS
EDIT FLATNESS
CAL STORE
ESCRIPTION
RAM to the area of memory on the A16 processor/video
assembly that retains data after the analyzer is turned
off.
S
CAL AMPTD
OFTKEYS
CAL FREQ
CAL FREQ & AMPTD
CAL FETCH
CAL TIMEBASE
CRT VERT POSITION
CRT HORZ POSITION
CAL TRK GEN
routine must be performed
CAL YTF
routine. New frequency
CAL MXR
routine is used. Refer to the
CAL MXR
CAL YTF
routine is finished, the optimum
CAL MXR
copies the correction factors from working
Softkey Descriptions
Softkey Descriptions
Chapter 2 for
and
CAL MXR
571