Replaceable Parts - Agilent Technologies 8590 Series Service Manual

Replaceable Parts

Replaceable Parts
Replaceable Parts
Major assembly and cable location information is given in
The following tables and figures are also included in this chapter:
•
•
•
•
•
•
•
•
The parts lists, schematics, and component-location diagrams for
NOTE
the 8590 E-Series and L-Series spectrum analyzers, 8591C cable TV
analyzers, and 8594Q QAM analyzers board assemblies are available
separately in the 8590 Series Analyzers Component-Level Repair
Service Guide.
486
Table 12-1 list reference designations, page
abbreviations, and Table 12-2
parts lists.
Table 12-2 lists standard value replacement capacitors.
Table 12-3 lists standard value replacement resistors, 0.125 W.
Table 12-4 lists standard value replacement resistors, 0.5 W.
Table 12-5 lists all major assemblies, and all major mechanical and
electrical parts that are not part of a major assembly.
Table 12-6 lists the cable assemblies.
Table 12-7 lists available component-level information packets.
Figure 12-1 through
identification information.
lists value multipliers used in the
Figure 12-7 give the analyzer parts
Chapter 11.
490 begins a list of
Chapter 12