Agilent Technologies 8590 Series Service Manual page 398

Analyzer Options and Block Diagrams
Option Descriptions
8593E, 8594E, 8595E, and 8596E: Option 010 is also available, with
factory installation (Option K10) after the purchase of your analyzer.
For 8590L and 8591E only. Option 010 (100 kHz to 1.8 GHz) or 011
(1 MHz to 1.8 GHz) provides a built-in tracking generator.
Option 010 has the standard 50Ω output impedance. Option 011 has
75Ω output impedance.
8590L: Options 010 and 011 are also available as retrofit kits
(Option R10 or R11) after the purchase of your analyzer, or as kits part
number 5062-6463 and 5062-6479 respectively.
8591E: Options 010 and 011 are also available as retrofit kits
(Option R10 or R11) after the purchase of your analyzer, or as kits part
numbers 5062-6460 and 5062-6480 respectively.
Protective Tan Operating/Carrying Case with
Shoulder Strap (Option 015)
This option lowers the maximum ambient operating temperature
specification by 5 °C. It allows instrument operation while installed in
the case.
It is a soft nylon operating and carrying case with a shoulder strap and
a pouch for accessories. It includes a CRT viewing hood for operation in
direct sunlight. Option 015 can be used to provide additional protection
during travel.
Protective Yellow Operating/Carrying Case with
Shoulder Strap (Option 016)
This option lowers the maximum ambient operating temperature
specification by 5 °C. It allows instrument operation while installed in
the case.
It is a soft nylon operating and carrying case with a shoulder strap and
a pouch for accessories. It includes a CRT viewing hood for operation in
direct sunlight. Option 016 can be used to provide additional protection
during travel.
IB and Parallel Interface (Option 041)
Option 041 allows you to control your analyzer from a computer that
uses a Hewlett-Packard interface bus (IB). Such computers include the
9000 Series 300, and the Vectra PC. Option 041 includes a connector for
an external keyboard, an IB connector, a parallel interface connector for
printers, and the 8590 E-Series and L-Series Spectrum Analyzers, and
8591C Cable TV Analyzer Programmer's Guide.
398 Chapter 10