Agilent Technologies 8590 Series Service Manual page 403

Analyzer Options and Block Diagrams
Option Descriptions
CT2 Demodulator (Option 110)
For 8591E, 8593E, 8594E, 8595E, and 8596E only. Option 110 provides
built-in demodulation capability for making CT2 transmitter
measurements. It must be used with the 85717A CT2-CAI
measurements personality to make frequency deviation measurements
on CT2 cordless telephone handsets and bases.
Option 110 is also available as a retrofit kit (Option R05) after the
purchase of your analyzer, or as a kit part number 5063-0244.
Group Delay and Amplitude Flatness (Option 111)
For 8593E, 8594E, 8595E, and 8596E only. Option 111 allows you to
make end-to-end and loop back measurements of group delay and
amplitude flatness. It must be used with 11770A Link Measurement
Personality and the Option 010, Tracking Generator. 11768A Group
Delay and Amplitude Flatness Retrofit Kit contains both the
Option 111 and the 11770A Link Measurement Personality. This kit is
factory retrofittable only.
DECT Demodulator (Option 112)
For 8593E, 8594E, 8595E, and 8596E only. This option provides built-in
demodulation capability for making DECT (Digital European Cordless
Telephone) measurements. It must be used with 85723A measurements
personality to make frequency and deviation measurements on DECT
handsets and base stations.
Option 112 is also available as a retrofit kit (Option R06) after the
purchase of your analyzer.
Noise Figure (Option 119)
For 8593E, 8594E, 8595E, and 8596E only. This option along with the
85719A Noise-Figure Measurement Personality provide displayed
swept noise-figure and gain measurements from 10 MHz to 2.9 GHz.
Option 119 is also available as a retrofit kit (Option R19) after the
purchase of your analyzer, or as a kit part number 5063-0247.
Narrow Resolution Bandwidths (Option 130)
For 8591E, 8593E, 8594E, 8595E, and 8596E only. This option provides
additional narrow resolution bandwidths of 30 Hz, 100 Hz, and 300 Hz.
These bandwidths improve the analyzer sensitivity and allow you to
resolve closely spaced signals.
Option 130 is also available as a retrofit kit (Option R30) after the
purchase of your analyzer, or as a kit part number 5063-0246.
Chapter 10 403