Oil-Coolant Heat Exchanger: Removal - Refitting - Renault Duster 2007 Manual

ENGINE AND CYLINDER BLOCK ASSEMBLY

Oil-coolant heat exchanger: Removal - Refitting

K9K, and 796
(1) Oil filter holder mounting bolt
(2) Oil filter
(3) Oil filter holder
(4) Coolant - oil heat exchanger
mounting bolts
(5) Coolant - oil heat exchanger
(6) Oil pressure sensor
a
REMOVAL
REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the engine cover,
Tightening torquesm
oil heat exchanger bolt
oil filter support bolt
- the engine undertray,
- the closure panel component under the diesel filter.
a Drain the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .
10A-37
10A
39 N.m
28 N.m
106794