Replacing An Mx240 Ac Power Supply Cord; Disconnecting An Mx240 Ac Power Supply Cord; Connecting An Mx240 Ac Power Supply Cord - Juniper MX240 Hardware Manual

MX240 AC Power Supply Description | 47
Preventing Electrostatic Discharge Damage to an MX240 Router | 467
AC Power Supply Electrical Specifications for the MX240 Router | 50

Replacing an MX240 AC Power Supply Cord

Disconnecting an MX240 AC Power Supply Cord | 387

1.

Connecting an MX240 AC Power Supply Cord | 387

2.
Disconnecting an MX240 AC Power Supply Cord
To disconnect the AC power cord:
1. Switch off the dedicated customer site circuit breaker for the power supply, and remove the power
cord from the AC power source. Follow the instructions for your site.
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
3. Move the AC input switch next to the appliance inlet on the power supply to the off (O) position.
4. Remove the power cord from the power supply.
Connecting an MX240 AC Power Supply Cord
To connect the AC power cord:
1. Locate a replacement power cord with the type of plug appropriate for your geographical location (see
"AC Power Cord Specifications for the MX240 Router" on page
2. Connect the power cord to the power supply.
3. Insert the power cord plug into an external AC power source receptacle.
51).
387