MX960 3D Universal Edge Router Hardware Guide
Related
Documentation
Storing an MX960 DPC
454
Figure 173: Do Not Rest the DPC on an Edge
If you must rest the DPC temporarily on an edge while changing its orientation between
vertical and horizontal, use your hand as a cushion between the edge and the surface.
MX960 DPC Terminology
Storing an MX960 DPC on page 454
Troubleshooting the MX960 DPCs on page 490
Replacing an MX960 DPC on page 355
You must store a DPC as follows:
In the router
In the container in which a spare DPC is shipped
Horizontally and sheet metal side down
When you store a DPC on a horizontal surface or in the shipping container, always place
it inside an antistatic bag. Because the DPC is heavy, and because antistatic bags are
fragile, inserting the DPC into the bag is easier with two people. To do this, one person
holds the DPC in the horizontal position with the faceplate facing the body, and the other
person slides the opening of the bag over the DPC connector edge.
Copyright © 2017, Juniper Networks, Inc.