Figure 3-25. Wan Interface Tab Window; Figure 3-26. Quick2Config Reset Confirmation Dialog Box - Bay Networks NA Install Manual

Chapter 3 Configuration Examples
Installing Remote Annex Network Software for Windows
3-30

Figure 3-25. WAN Interface Tab Window

3. Click on the Switch Type pop-up menu to select the module's
type.
Quick2Config activates other parameter selection boxes in the
window based on the switch type selected.
4. Set the other parameters as required, and click on Apply.
Quick2Config Annex opens a dialog box to confirm that the WAN
module is to be reset
Figure 3-26. Quick2Config Reset Confirmation Dialog Box
(Figure 3-26).