Table of Contents
Advertisement
Chapter 4
Using the Main Window
Understanding the Main Window Format
Annex Manager User Guide
4-4
In Customize mode, the main window is divided
configuration areas. These areas work together, allowing you to select
Annex names and parameter options.
•
In the specification area, you can select one or more Annexes
from a list. This area appears in Setup mode.
•
In the configuration area, you choose the parameter groups or
lists you will use for the Annexes you selected. This area
appears only in Customize mode.
The information required in the specification and configuration areas
depends on the command you choose. When you complete required
information, you can use Setup windows and other Annex Manager
commands.
The main window displays at all times when you use Annex
Manager. In Customize mode, you can return to this window at
any time to change list or parameter information. In Setup mode,
you must close all other Setup windows before you can return to
the main window.
Using the Specification Area
The main window's specification area stores an Annex list. Annex
Manager's configuration and status commands work for the Annexes that
appear on the list.
Part 1
Annex Manager Basics
into specification and
Advertisement
Table of Contents
