Viewing And Updating Snmp Information - Bay Networks Manager User Manual

Chapter 4 Using the Main Window
Using the SNMP
Information
Command
Annex Manager User Guide
4-22

Viewing and Updating SNMP Information

To check current SNMP information or to change Annex values:
1. Create an Annex list and select one or more Annexes.
For information.
change the Annex Manager SNMP default values only, you can
skip this step.
2. Move the pointer to the Option menu and choose
.
Information
3. Enter new values for
Show Default
use
Show Default
always displays the Annex Manager default values.
The values that display when you use
Annexes you selected in the main window:
• If you select a single Annex or multiple Annexes that have
the same values, text fields display current values.
• If you select multiple Annexes that have different values, a
warning window informs you that differences exist and
values do not display. If you choose
circumstance, Annex Manager uses its default values.
4. Select Update Selected Annex(es) on Apply
Values on Apply.
You can select one or both check buttons.
5. Choose Apply
Annex Manager changes Annex or default values based on the
check buttons you selected and on values in the text fields.
in this chapter. If you want to
Creating Annex Lists
, and/or
Timeout Retries
Show Annex
or to display current values.
Show Annex
.
Part 1 Annex Manager Basics
SNMP
Community String
depend on the
under this
Apply
and/or Update Default
or