Figure 4-11. Information Message Box - Bay Networks 2000 Installation Manual

Chapter 4 Installing Quick2Config on Windows 3.1 and Windows for Workgroups 3.11
• If you installed the Chameleon communications stack,
another message, "Please wait while Setup modifies your
program group," appears. Setup finishes installing
Quick2Config Annex and installs the Chameleon IP Stack.
The Custom Window opens (Figure A-1). Refer to
Appendix A for information about configuring the
Chameleon IP stack. The Restart Windows dialog box
opens (Figure 4-12) if you modified your system files. Skip
to step 10.
• If you did not install a communications stack, or if one was
previously installed, the Information message box opens
(Figure 4-11). You must install a communications stack
before you use Quick2Config Annex to manage your
Annexes.

Figure 4-11. Information Message Box

5. Click on OK. Double-click on the Q2C Annex icon in the Bay
Networks program group to run Quick2Config Annex.
Installing Remote Annex Network Software for Windows
4-11