Editing A Voice Device; Figure 9-2. Device Table Warning - Bay Networks CLAM Reference Manual

The Ethernet (LAN) port is the port that accesses the local
network. Its attributes cannot be edited. Selecting the LAN01
device and choosing the Edit button will cause the following error
to appear:
Figure 9-2.
Clicking on the OK button will clear this error.

Editing a Voice Device

There are two voice devices on a Nautica 200 and one on a voice
CLAM. Voice ports are numbered Voice01, Voice02, and these
ports are displayed in the Device table. In the Nautica 200, the
naming of the ports relates to the numbers assigned to the ports on
the back panel of the unit. Port 1 is Voice01 and Port 2 is Voice02.
To edit a voice device, select the relevant device (Voice 01 or
Voice02) and click on the Edit button. The Edit Voice Card
window,
118814-A Rev. A
Device Table Warning
Figure 9-3, appears.
Issue 1
Changing Device Settings
9-3