Mp Operational Characteristics; Mp Parameters - Bay Networks Remote Annex Administrator's Manual

Multilink ppp addendum to the remote annex administrator’s guide for unix
Hide thumbs Also See for Remote Annex:
Table of Contents

Advertisement

MP Load Balancing
MP Fragmentation
Bypass
ppp_ncp
mp_mrru
Multilink PPP Addendum to the Remote Annex Administrator's Guide for UNIX

MP Operational Characteristics

The bundle distributes fragmented packets over all active member
links.
Packets smaller than a fixed size are not fragmented in order to reduce
processing load caused by reassembly at the remote endpoint.

MP Parameters

Allows you to set the mode for NCP negotiations for MP. You must
set this parameter to all or include mp in order to negotiate MP over
NCP.
Sets the upper limit of the MRRU LCP negotiation. All LCP
negotiations will start with this value. Downward negotiation is
allowed.
Default = 1500
Minimum value = 64
Maximum value = 1500
166-024-833
Rev. A
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multilink ppp

Table of Contents