Booting The Remote Annex - Bay Networks Remote Annex Quick Start Manual

Remote Annex 6300
Remote Annex 5393
All Annexes

Booting the Remote Annex

1. Enter addr and answer the prompts as shown in the
example. To accept the default shown in brackets, press the
key.
Return
monitor:: addr
Enter Internet address (hex) <uninitialized>::
192.9.200.62
Enter Subnet mask [255.0.0.0]::
Enter Broadcast address [0.0.0.0]::
Enter Preferred Load Host address [<any host>]::
192.9.200.55
Enter Preferred Dump Host address [0.0.0.0]::
Enter Preferred Load/Dump Gateway address
<uninitialized>::
Select type of IP packet encapsulation (ieee802/
ethernet) [<ethernet>]::
Load Broadcast y/n [y]::
2. If you have purchased a LAT key, enter the software key
provided by Bay Networks.
monitor:: lat
Enter LAT KEY: [<uninitialized>]::
At the Remote Annex, enter
monitor:: boot
Enter boot file name [oper.46.enet]::
Requesting boot file "oper.46.enet".
Unanswered requests shown as "?", transmission errors as "*".
Requesting boot from 192.9.200.55 via Ethernet...
Booting from 192.9.200.55
Header received OK. Received data blocks shown as "."
. . . . . . . . . . . . . . .EOF
The boot file requested in the example is for a Remote Annex 4000
or 6100. Boot files for other models are:
Remote Annex 2000 oper.56.enet
Remote Annex 6300 oper.63.enet
Remote Annex Quick Start for Windows
at the monitor prompt:
boot
166-024-858 Rev. A
7