Installing A T4000 Cip; Figure 87: Removing The Cip - Juniper T4000 Hardware Manual

T4000 Core Router Hardware Guide

Installing a T4000 CIP

246
CAUTION: Be sure to slide the CIP straight within the slot to avoid
damaging the connector pins on the front of the midplane.

Figure 87: Removing the CIP

To install the CIP (see Figure 88 on page
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the CIP handle with one hand and hold the bottom edge of the CIP with the
2.
other hand to support its weight.
248):
Copyright © 2018, Juniper Networks, Inc.