Connecting The Router To External Devices; Overview Of Connecting The T4000 Router To External Devices - Juniper T4000 Hardware Manual

CHAPTER 21

Connecting the Router to External Devices

Overview of Connecting the T4000 Router to External Devices

Copyright © 2018, Juniper Networks, Inc.
Overview of Connecting the T4000 Router to External Devices on page 177
Tools and Parts Required to Connect the T4000 Router to External Devices on page 178
Connecting the T4000 Router to a Management Console or Auxiliary Device on page 178
Connecting the T4000 Router to a Management Ethernet Device on page 180
Connecting the T4000 Router to an External Alarm-Reporting Device on page 182
Connecting PIC Cables to the T4000 Router on page 183
After you have grounded the T4000 Core Router, you can connect the following external
devices:
An external console or auxiliary device to the
Panel (CIP).
See "Connecting the T4000 Router to a Management Console or Auxiliary Device" on
page 178.
A laptop, modem, or other auxiliary device to the
See "Connecting the T4000 Router to a Management Console or Auxiliary Device" on
page 178.
A management network to the
See "Connecting the T4000 Router to a Management Ethernet Device" on page
An external alarm-reporting device to the alarm relay contacts on the CIP.
See "Connecting the T4000 Router to an External Alarm-Reporting Device" on page
An external clocking device to the
Generator with RJ-48 ports.
See Connecting the T4000 Router to an External Clocking Device.
ports on the Connector Interface
CONSOLE
AUXILIARY
ETHERNET ports on the CIP.
EXTERNAL CLOCK INPUTS
ports on the CIP.
180.
182.
on the SONET Clock
177