Related
Documentation
Reinstalling the T4000 Components in the Chassis
Copyright © 2018, Juniper Networks, Inc.
Figure 52: Installing the Router in the Rack
NOTE:
For an illustration of the mounting hardware required for an
open-frame rack, see
Open-Frame Rack" on page
T4000 Clearance Requirements for Airflow and Hardware Maintenance on page 91
Overview of Installing a T4000 Router Without a Mechanical Lift on page 147
Removing T4000 Components from the Chassis on page 148
Reinstalling the T4000 Components in the Chassis on page 163
Prevention of Electrostatic Discharge Damage on page 423
After the router is installed in the rack, you reinstall the removed components before
cabling, booting, and configuring the router.
Chapter 19: Installing the Router into a Rack Without a Mechanical Lift
"Installing the T4000 Mounting Hardware for an
133.
163