Definitions Of Safety Warning Levels - Juniper T4000 Hardware Manual

T4000 Core Router Hardware Guide
Related
Documentation

Definitions of Safety Warning Levels

394
Do not open or remove chassis covers or sheet-metal parts unless instructions are
provided in the hardware documentation for this device. Such an action could cause
severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the chassis or onto any device component. Such an action
could cause electrical shock or damage the device.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Some parts of the chassis might become hot. The following label provides the warningof
the hot surfaces on the chassis:
Always ensure that all modules, power supplies, and cover panels are fully inserted
and that the installation screws are fully tightened.
AC Power Electrical Safety Guidelines
General Electrical Safety Guidelines and Warnings on page 421
Maintenance and Operational Safety Guidelines and Warnings on page 415
Installation Instructions Warning on page 401
Grounded Equipment Warning on page 408
The documentation uses the following levels of safety warnings (there are two Warning
formats):
NOTE: You might find this information helpful in a particular situation, or you
might overlook this important information if it was not highlighted in a Note.
CAUTION: You need to observe the specified guidelines to prevent minor
injury or discomfort to you or severe damage to the device.
WARNING: This symbol alerts you to the risk of personal injury from a laser.
WARNING: This symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
Copyright © 2018, Juniper Networks, Inc.