T640 Core Router Hardware Guide
Installing a T640 CIP
268
CAUTION:
Be sure to slide the CIP straight within the slot to avoid
damaging the connector pins on the front of the midplane.
Figure 117: Removing a CIP
To install the CIP (see
Figure 118 on page
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the CIP handle with one hand and hold the bottom edge of the CIP with the
2.
other hand to support its weight.
270):
Copyright © 2017, Juniper Networks, Inc.