Reinstalling The Power Supplies; Figure 56: Reinstalling A T4000 Sib - Juniper T4000 Hardware Manual

T4000 Core Router Hardware Guide

Reinstalling the Power Supplies

168

Figure 56: Reinstalling a T4000 SIB

Reinstall the lower power supply first, then the upper power supply. To reinstall the DC
power supplies (see Figure 57 on page
Using both hands, slide the power supply into the chassis until you feel resistance.
1.
Twist the ejector handles at the upper corners of the power supply faceplate clockwise
2.
until they stop.
Tighten the captive screws at the lower corners of the power supply faceplate to
3.
secure the power supply in the chassis.
Repeat the procedure for the upper power supply.
4.
169):
Copyright © 2018, Juniper Networks, Inc.