Connecting The Router To Power; Tools And Parts Required To Provide Power To The T4000 Router - Juniper T4000 Hardware Manual

CHAPTER 22

Connecting the Router to Power

Tools and Parts Required to Provide Power to the T4000 Router

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Tools and Parts Required to Provide Power to the T4000 Router on page 185
Connecting DC Power to the T4000 Router (Six 60-A Inputs) on page 186
Connecting DC Power to the T4000 Router (Five 60-A Inputs) on page 190
Connecting DC Power to the T4000 Router (Four 60-A Inputs) on page 194
Connecting DC Power to the T4000 Router (Three 80-A DC Power Cables to Six 60-A
Inputs) on page 198
To connect the router to power, you need the following tools and parts:
DC-powered routers: 7/16-in. (11 mm) hexagonal-head external drive nut driver, with
a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts
to terminal studs on each power supply on a DC-powered router.
Torque-controlled tool.
CAUTION: You must use an appropriate torque-controlled tool to tighten
the nuts. Applying excessive torque damages the terminal studs and the
power supply. The absolute maximum torque that may be applied to this
nut is 45 in-lb (5.0 Nm).
DC power cables and lugs. See
page 105.
Connecting DC Power to the T4000 Router (Six 60-A Inputs) on page 186
Connecting DC Power to the T4000 Router (Five 60-A Inputs) on page 190
Connecting DC Power to the T4000 Router (Four 60-A Inputs) on page 194
Connecting DC Power to the T4000 Router (Three 80-A DC Power Cables to Six 60-A
Inputs) on page 198
"T4000 DC Power Cable and Lugs Specifications" on
185