Copyright © 2018, Juniper Networks, Inc.
Grasp the Routing Engine by the ejector handles, and slide it about halfway out of the
8.
chassis.
Place one of your hands underneath the Routing Engine to support it, and slide it
9.
completely out of the chassis.
Place the Routing Engine on the antistatic mat.
10.
If you are not replacing the Routing Engine now, reinstall the Routing Engine cover,
11.
and tighten the screws on the corners of the cover to secure it to the chassis.
Figure 110: Removing the Routing Engine Cover
Figure 111: Removing a T4000 C1800 Routing Engine
Chapter 29: Replacing Host Subsystem Components
283