T4000 Core Router Hardware Guide
Reinstalling the Rear Fan Tray
164
The procedures describe how to reinstall components in the chassis, first in the rear and
then in the front:
Reinstalling the Rear Fan Tray on page 164
1.
Reinstalling the T4000 SCGs on page 165
2.
Reinstalling the T4000 Control Boards on page 166
3.
Reinstalling the T4000 SIBs on page 167
4.
Reinstalling the Power Supplies on page 168
5.
6.
Reinstalling the FPCs on page 169
Reinstalling T4000 Front Fan Trays on page 170
7.
Reinstalling the T4000 Front Cable Management System on page 171
8.
To install a replacement rear fan tray (see
Grasp the fan tray by its handles, and insert it straight into the chassis.
1.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis, using
2.
a Phillips (+) screwdriver, number 2.
Figure 53 on page
165):
Copyright © 2018, Juniper Networks, Inc.