SCG Components
Copyright © 2018, Juniper Networks, Inc.
The SCG with DB-9 ports is shown in
Figure 11: SCG with DB-9 Ports
The SCG with RJ-48 ports is shown in
Figure 12: SCG with RJ-48 ports
Online/Offline button
OK
Fail
Master
Each SCG consists of the following components:
19.44-MHz Stratum 3 clock.
Field-programmable gate array (FPGA) that performs multiplexing of clock sources.
SCG online/offline button, located on the SCG faceplate.
Two external clock inputs.
NOTE:
The external clock ports are not supported on the SCG with DB-9
ports.
For information about configuring external clock synchronization for T Series routers,
see the Junos OS Administration Library.
For information about configuring an interface transmit clock, see the Junos OS Network
Interfaces Library for Routing Devices.
Three LEDs—
,
, and
OK
FAIL
status of the SCG.
Chapter 3: Chassis Components and Description
Figure 11 on page
21.
Figure 12 on page
EXTERNAL CLOCK INPUTS
, located on the SCG faceplate, that display the
MASTER
21.
21