Reinstalling the T4000 SCGs
Copyright © 2018, Juniper Networks, Inc.
Figure 53: Reinstalling the Rear Fan Tray
To reinstall the SCGs (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Carefully align the sides of the SCG with the guides in the SCG slot.
2.
Grasp the SCG by its handle, and slide it straight into the chassis until it contacts the
3.
midplane.
Chapter 19: Installing the Router into a Rack Without a Mechanical Lift
Figure 54 on page
166):
165