Overview Of Installing The Router Into A Rack; Overview Of Installing The T4000 Router Into A Rack - Juniper T4000 Hardware Manual

CHAPTER 17
Overview of Installing the Router into a
Rack

Overview of Installing the T4000 Router into a Rack

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Overview of Installing the T4000 Router into a Rack on page 137
Read the safety information. To avoid harm to yourself or the router as you lift it into
1.
the rack, follow the guidelines and safety procedures for working with routers.
See "T4000 Installation Safety Guidelines" on page 120
and Warnings" on page
Verify that the site has been prepared for the router installation.
2.
See "Overview of Preparing the Site for the T4000 Router" on page
Because of the T4000 router's size and weight—up to 663.6 lb (301.0 kg) fully
3.
configured—we strongly recommend that you lift the router into the rack using a
mechanical lift. See "Overview of Installing a T4000 Router Using a Mechanical Lift"
on page 139
However, if a mechanical lift is not available, you can remove components from the
chassis to make it easier to install into the rack. With components removed, the chassis
weighs approximately 240 lb (109 kg), and four people can lift the chassis into the
rack manually. See "Overview of Installing a T4000 Router Without a Mechanical Lift"
on page 147.
Overview of Installing the T4000 Router on page 119
393.
and "General Safety Guidelines
87.
137