Management Ports
Copyright © 2018, Juniper Networks, Inc.
located at the left side of the FPC card cage, above the front electrostatic discharge
point.
The CIP is hot-pluggable.
Figure 6: CIP
HOST
0
ETHERNET
ACT 0
YEL = 10M
GRN = 100M
CONSOLE
AUXILIARY
HOST
1
ETHERNET
ACT 1
YEL = 10M
GRN = 100M
CONSOLE
AUXILIARY
RED ALARM
NC
C
NO
NC
C
NO
YELLOW
ALARM
The CIP has two sets of management ports (see
connect the Routing Engines to external management devices. The upper set of ports,
labeled
, connects to the Routing Engine in slot
HOST 0
Chapter 3: Chassis Components and Description
Figure 6 on page
15) that you use to
; and the lower set, labeled
RE0
15