Packing The T4000 Router Components For Shipment - Juniper T4000 Hardware Manual

Core router
Hide thumbs Also See for T4000:
Table of Contents

Advertisement

Related
Documentation

Packing the T4000 Router Components for Shipment

Copyright © 2018, Juniper Networks, Inc.
Remove the cables that connect to all external devices. For instructions, see
5.
a T4000 Management Ethernet Cable" on page
Auxiliary Cable" on page
Remove all field replaceable units (FRUs) from the router.
6.
Remove the router from the rack:
7.
If you are using a mechanical lift, place the lift platform under the router, unscrew
and remove the mounting screws from the rack, and move the router to the shipping
crate.
If you are not using a mechanical lift:
If the router weight is fully supported by a shelf or another router, unscrew and
remove the mounting screws from the rack. Four people can then lift the router
and move it to the shipping crate.
If the router weight is not fully supported by a shelf or another router, four people
should grasp the router while another person unscrews and removes the mounting
screws from the rack. The lifters can then move the router to the shipping crate.
Place the router into the shipping crate or onto the pallet. If on a pallet, bolt the router
8.
to the pallet.
Cover the router with an ESD bag, and place packing foam on top of and around the
9.
router.
Replace the accessory box on top of the packing foam.
10.
Securely tape the box closed or place the crate cover over the router.
11.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
12.
ensure proper tracking.
Contacting Customer Support on page 375
Prevention of Electrostatic Discharge Damage on page 423
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Chapter 39: Packing and Returning Components
253,
251, and
"Replacing the T4000 Alarm Relay Wires" on page
"Removing
"Removing a T4000 Console or
255.
389

Advertisement

Table of Contents
loading

Table of Contents