Reinstalling The T4000 Front Cable Management System; Figure 59: Reinstalling An Upper Front Fan Tray; Figure 60: Reinstalling A Lower Front Fan Tray - Juniper T4000 Hardware Manual

Reinstalling the T4000 Front Cable Management System

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.

Figure 59: Reinstalling an Upper Front Fan Tray

T Ser ies
FANTR AY-T40 00

Figure 60: Reinstalling a Lower Front Fan Tray

To reinstall the front cable management system:
Position the front cable management system on the studs on the lower front of the
1.
chassis.
Insert the nuts through the holes in the cable management system onto the studs on
2.
the chassis.
Using a 3/8-in. nut driver, tighten the nuts securely.
3.
Overview of Installing a T4000 Router Without a Mechanical Lift on page 147
Removing T4000 Components from the Chassis on page 148
Prevention of Electrostatic Discharge Damage on page 423
Chapter 19: Installing the Router into a Rack Without a Mechanical Lift
171