Figure 119: Installing An Fpc - Juniper T4000 Hardware Manual

Copyright © 2018, Juniper Networks, Inc.
Carefully align the connector edge of the FPC with the appropriate empty slot in the
10.
chassis.
Lift the FPC into place, and carefully align the bottom and top of the FPC with the
11.
guides inside the card cage.

Figure 119: Installing an FPC

Gently rest the bottom edge of the FPC on the bottom edge of the slot opening, making
12.
contact a short distance forward of the power connector.
CAUTION: Take care not to bend or otherwise damage the power
connector prongs.
Slowly slide the FPC into the slot until you feel resistance.
13.
Align the ejector handles on the FPC faceplate in a position close to horizontal.
14.
Chapter 30: Replacing Line Card Components
Do not bend or damage prongs
on power connector
299