Fpc Terminology; Figure 20: Fpc5 Supported By The Router - Juniper T4000 Hardware Manual

T4000 Core Router Hardware Guide

FPC Terminology

60
The T4000 FPC5 (T4000-FPC5-3D and T4000-FPC5-LSR) is shown in
Figure 20 on page 60.

Figure 20: FPC5 Supported by the Router

Regardless of whether you are holding an FPC vertically or horizontally, this document
uses the same terms for all four edges of the FPC (see
Faceplate—Edge of the FPC that has slots into which you insert the PICs
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
Top edge—Edge at the top of the FPC when it is vertical
Bottom edge—Edge at the bottom of the FPC when it is vertical
Figure 21 on page 61):
Copyright © 2018, Juniper Networks, Inc.