M320 Router Hardware Guide
Reinstalling an M320 Rear Fan Tray
82
Reinstalling M320 Front Fan Trays on page 86
Reinstalling the M320 Cable Management System on page 87
To reinstall the rear fan tray (see Figure 43 on page 82):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to an approved site ESD grounding point. See the instructions for your site.
Grasp the handle with one hand and place the other hand under the fan tray. Insert
2.
the fan tray straight into the chassis.
Tighten the captive screws on the top and bottom of the fan tray faceplate to secure
3.
it in the chassis.
Figure 43: Reinstalling the Rear Fan Tray
Copyright © 2010, Juniper Networks, Inc.