Reinstalling The Cable Management System; Figure 46: Reinstalling A Front Fan Tray After Installing The M120 Router - Juniper M120 Hardware Manual

Figure 46: Reinstalling a Front Fan Tray After Installing the M120 Router

Reinstalling the Cable Management System

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
To reinstall the cable management system:
Position the cable management system on the studs on the lower front of the chassis.
1.
Insert the nuts on the corners in the cable management system onto the studs on the
2.
chassis.
Using a 3/8-in. nut driver, tighten the nuts securely.
3.
M120 Router Chassis Description on page 7
M120 Router Installation Summary on page 111
Removing Components from the Chassis Before Installing the M120 Router Without a
Mechanical Lift on page 129
Chapter 18: Installing the M120 Without a Mechanical Lift
149