Field Service Ver3.0 Nov.2006
11.1.6
Paper lift plate skew adjustment
Perform the paper lift plate skew adjustment after replacing a lift wire or when the paper lift plate is skewed.
[2]
[1]
1.
[3]
[1]
2.
3.
4.
1050fs3038c
5.
[2]
6.
1050fs3039c
11. MECHANICAL ADJUSTMENT
Pull out the paper feed tray.
If any paper remaining, remove it.
Loosen a screw [1].
With the release lever [2] placed at its original
position, hold the stopper [3] and tighten the
screw [1] to fix the stopper.
Set the tray. Confirm that the paper lift finished its
elevation to the top by hearing the sound of the
paper lift motor. Pull out the tray again.
Remove 2 screws [2] of the stopper of the rails [1]
on the right and left side. Pull out the tray.
507