Troubleshooting; Jam Code; Jam Code List - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006

TROUBLESHOOTING

13. JAM CODE

13.1 Jam code list

Classifi- Jam
cation code
Tray 1 J11-01
J11-02
J11-03
J11-04
J11-05
J11-06
Tray 2 J12-01
J12-02
J12-03
Cause
The paper feed sensor /1 (PS7) does
not turn ON within a specified period of
time after the paper feed clutch /1 (CL4)
turns ON.
The pre-registration sensor /1 (PS17)
does not turn ON within a specified
period of time after the paper feed
clutch /1 (CL4) turns ON.
The vertical conveyance sensor /1
(PS19) does not turn ON within a speci-
fied period of time after the pre-registra-
tion sensor /1 (PS17) turns ON.
When the trailing edge of paper is pass-
ing through the vertical conveyance
sensor /1 (PS19), the pre-registration
sensor /1 (PS17) is turned ON by the
succeeding paper.
The vertical conveyance sensor /1
(PS19) turns ON while in idling.
The pre-registration sensor /1 (PS17)
turns ON while in idling.
The paper feed sensor /2 (PS13) does
not turn ON within a specified period of
time after the paper feed clutch /2 (CL6)
turns ON.
The pre-registration sensor /2 (PS18)
does not turn ON within a specified
period of time after the paper feed-
clutch /2 (CL6) turns ON.
The vertical conveyance sensor /3
(PS21) does not turn ON within a speci-
fied period of time after the pre-registra-
tion sensor /2 (PS18) turns ON.
Resulting
operation
If there is a sheet Pull out tray /1 and
of paper being remove jammed paper if
printed when a any.
jam occurs, the
main body com-
Open tray /1 and the
pletes the paper
main body vertical con-
exit before stop-
veyance door, and
ping operations.
remove jammed paper if
any.
After completion
of the exit of the
preceding paper,
the main body
stops operations.
— Open the main body ver-
tical conveyance door
and remove jammed
paper if any.
Pull out tray /1 and
remove jammed paper if
any.
If there is a sheet Pull out tray /2 and
of paper being remove jammed paper if
printed when a any.
jam occurs, the
main body com-
Open tray /2 and the
pletes the paper
main body vertical con-
exit before stop-
veyance door, and
ping operations.
remove jammed paper if
any.
13. JAM CODE
Correction
533
2