Konica Minolta bizhub PRO 1050 Service Manual page 126

3. PERIODIC CHECK
D. Removing/reinstalling the tray
Caution:
• The tray is heavy. Be sure to conduct this operation with two people.
NOTE
• The procedure for removing/reinstalling the trays /1 to /2 is identical. The explanation here is made
of the tray /1.
• When raising up the tray, be sure to hold it at the specified positions. Holding it at positions other
than those specified may cause damage to the tray, thus resulting in a paper feed jam.
(1) Procedure
[1]
94
1.
Open the toner supply door.
2. Lightly raise up the tray lock lever [1] and pull out
the tray [2].
3.
When paper remains in the tray, take it all out.
[2]
1050fs2715c
Field Service Ver3.0 Nov.2006