Konica Minolta bizhub PRO 1050 Service Manual page 44

Field Service Ver3.0 Nov.2006
No. Unit
classification
16 Main body Cleaning of the cover/
machine internal
17 Final check Check of the image and
the paper through (with
various types of adjust-
ments included)
PM counter reset
(in service mode)
B. Maintenance 2 (Every 1,000,000 prints)
No. Unit
classification
1 Preparations Image check
2 Photo conductor Replacing of the drum
section DR010
• Sensitive drum
Cleaning of the photo
conductor section
Replacing of the drum
claw
57GA2919#
3 Cleaning/ Cleaning of the clean-
recycle section ing unit
4 Developing Cleaning of the devel-
section oping section
Developer
DV010
• Developer counter
5 Main body Cleaning of the cover/
machine internal
6 Final check Check of the image
and the paper through
(with various types of
adjustments included)
Description Quantity
Description Quantity
1
counter reset (in ser-
vice mode)
3
reset (in service
mode)
Implementation classification
Cleaning Check Lubrication Replacement
Implementation classification
Cleaning Check Lubrication Replacement
3. PERIODIC CHECK
Materials
Tools used
Drum cleaner/
cleaning pad
Materials
Tools used
Replace it once for
every 1,000,000
prints or 220 h. of
driving time, which-
ever is earlier.
Drum cleaner/clean-
ing pad/vacuum
cleaner
Cleaning pad/
blower brush/vac-
uum cleaner
Cleaning pad/vac-
uum cleaner
Replace it once for
every 1,000,000
prints or 200 h. of
driving time, which-
ever is earlier.
Drum cleaner/
cleaning pad
13