Konica Minolta bizhub PRO 1050 Service Manual page 490

10. SERVICE MODE
12. "Date and Time setting screen"
Enter the year in 2 digits with the numeric keys,
and press the [Set] key.
13.
Enter time with the numeric keys, and press the
[Set] key.
14. Press the [Time Zone] key.
15. Enter the time zone with the numeric keys, and
press the [Set] key.
16.
Press the [OK] key to return to the "Setting
menu screen."
* Enter the No. code that is assigned in advance.
F. Modem initial setting
1.
"Modem setting menu screen"
Press the [01 Basic setting] key.
2.
"Basic setting screen"
Press the [Center No.] key.
3. Enter the center ID with the keyboard, and
press the [OK] key.
4.
Press the [Center Telephone Number] key.
5.
Enter the center telephone number with the
numeric and symbolic keys.
Use [T]s and [P]s depending on the modem
and the phone line. *1
6.
Press the [Machine Telephone Number] key.
7.
Enter the machine telephone number with the
numeric and symbolic keys.
Use [T]s and [P]s depending on the modem
and the phone line. *1
8.
Press the [OK] key to return to the "Modem set-
ting menu screen."
9.
"Modem setting menu screen"
Press the [04 AT command] key.
10. "AT command setting screen"
Press the [First command] key.
11.
Enter the modem initialization command with
the keyboard, and press the [OK] key. *2
12. Press the [OK] key to return to the "Modem set-
ting menu screen."
456
Field Service Ver3.0 Nov.2006
*1 When entering the telephone number, keys on
the screen other than numeric keys represent
the followings.
[ , ] Pause: holds the self-dial delivery for some time
[W] Wait: detects the destination dial tone
[T] Tone dial: tone dialing
[P] Pulse dial: pulse dialing
[—] Number delimiter: ignored when actually dialed
[*] [#] [•]: use as necessary
*2 Change the modem initialization command if
necessary (Usually, there is no need to change).
For details, refer to the manual of the modem.
G. Baud rate setting
NOTE
• In case you changed bit data by accident, be
sure to restore the previous state.
1. "Modem setting menu screen"
Press the [05 Software SW setting] key.
2.
"Software SW Setting screen"
Set "01" with the DIPSW number.
Set the modem baud rate using the DIPSW bit
number "4 to 7".*
3.
Press the [Return] key to return to the "Modem
setting menu screen."
* Modem baud rate
Baud rate
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
01-7 01-6 01-5 01-4
0 0 1 1
0 1 0 0
0 1 0 1
0 1 1 0
0 1 1 1
1 0 0 0
1 0 0 1