Konica Minolta bizhub PRO 1050 Service Manual page 96

3. PERIODIC CHECK
[2]
[1]
[2]
[4]
64
[1]
1050fs2008c
[5]
[3]
[3]
[4]
1050fs2009c
Field Service Ver3.0 Nov.2006
12. Remove 2 connectors [1] and the wiring harness
from the wiring harness clamp.
13. Release 2 hose clamps [1] and remove 2 hoses
[3] from the toner feed case [2].
NOTE
• Keep each of the released hose clamps [1]
near the connecting opening of each hose [3].
• When the hose [3] is removed from the toner
feed case [2], toner may spill out of each
hose. Be careful that the inside of the main
body does not get stained with toner.
• The hose connecting section of the toner feed
case [2] and the hose [3] are provided with the
toner supply installation label [4] that indi-
cates the respective points to which a con-
nection is made. When installing each hose,
be sure to make a connection between the
points having the corresponding toner supply
installation label [4].
14.
Release the cable clamp [5] and pull out the hose
[3] to the outside of the main body.
NOTE
• The hose [3] may be damaged when the toner
supply unit [6] is being removed. Be sure to
pull it out to the outside of the main body.