Konica Minolta bizhub PRO 1050 Service Manual page 306

6. OTHERS
[5] [4]
[4]
[2]
274
[3] [1] [2]
[5]
1050fs2758c
[1]
1050fs2759c
Field Service Ver3.0 Nov.2006
11. Remove the E-rings [1], one each provided at the
2 places and then remove the wire covers [2],
one each.
12. Remove the lift wires /Fr1 [4] and /Fr2 [5] from
the pulley [3].
NOTE
• When reinstalling it, make sure that the lift
wires /Fr1 [4] and /Fr2 [5] are contained in the
wire cover [2] and they are not crossing each
other.
13.
Pull out from up to down the lift wires /Fr1 and /
Fr2 [2] from the arm [1] of the paper lift plate.
NOTE
• Be sure to pull out the lift wire gently and take
care that the lift wire does not get damaged
by the edges of the metal frame.