Konica Minolta bizhub PRO 1050 Service Manual page 223

Field Service Ver3.0 Nov.2006
(2) Procedure for reinstallation
[3]
[4]
[2]
[1]
[5]
[6]
1050fs2215c
1.
Install 2 faston terminals [2] to the thermostat /2
[1].
2. Insert the thermostat positioning jig /B [4]
between the thermostat /2 [1] and the fusing
heating roller [3].
3. Adjust the position of the thermostat /2 so that it
become flush with the thermostat positioning jig /
B, and then fix it with the screw [5].
NOTE
• Be sure to adjust the distance a [6] between
the thermostat /2 and the fusing heating roller
so that it becomes equal to the thickness of
the thermostat positioning jig /B.
Specified value: a = 3.0 ± 0.2 mm
4. Apply Screw-lock to the screw [5].
5.
For the parts to be reinstalled hereafter, reinstall
them following the removal steps in reverse.
3. PERIODIC CHECK
191