Adu Section; Pre-Transfer Roller Nip Pressure Adjustment - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006

11.3 ADU section

11.3.1

Pre-transfer roller nip pressure adjustment

This adjustment enables you to up/down the pre-transfer roller nip pressure.
Perform this adjustment when a transfer jitter occurred. For more information on how to perform this adjust-
ment, see "12.4 Transfer jitter
A. Nip pressure up adjustment procedure
[2]
adjustment".
[1]
1050fs3025c
11. MECHANICAL ADJUSTMENT
1. Pull out the ADU. (See P.36)
2.
Remove the ADU cover /Lt, /Rt.
3.
Twist counterclockwise the conveyance roller /T
axis [1] until the axis stopper [2] is locked.
Note
• To restore the previous nip pressure, twist
clockwise the conveyance roller /T axis until
the axis stopper is locked.
4.
Reinstall the above parts following the removal
steps in reverse.
(See P.36)
511
1