Konica Minolta bizhub PRO 1050 Service Manual page 220

3. PERIODIC CHECK
S. Removing/reinstalling the thermostat /1
NOTE
• Be sure to make the position adjustments when the roller has cooled down.
• When reinstalling the thermostat /1, adjust it with the thermostat positioning jig /A before fixing it.
Be sure to apply Screw-lock to the screw that has been fixed.
• After completion of the reinstallation of the thermostat /1, be sure to check the wiring harness to
see if it is in touch with the fusing roller /Up.
(1) Procedure for removal
[2]
188
1.
[1]
2.
3.
4.
5.
NOTE
• For method for reinstalling the thermostat /1,
[3]
1050fs2212c
Field Service Ver3.0 Nov.2006
Pull out the ADU from the main
Remove the fusing section.
Remove the web section.
Remove 2 faston terminals [1].
Remove the screw [2] and then remove the ther-
mostat /1 [3].
see "(2) Procedure for reinstallation."
body.(See P.112)
(See P.156)
(See P.178)