The Front And Back Registration By User (For Fine Adjustments) - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006
12.2.5 The front and back registration by user
(for fine adjustments)
Even when conducting the adjustments for brand of
paper as described in 12.2.4, an adjustment may be
required depending on the number of tray in which
paper is fed, the storage condition (temperature and
humidity) of paper and the temperature and humidity
in the room, etc.
This adjustment describes the method for fine adjust-
ment of each tray to the front and back adjustment of
the paper brand setting described in 12.2.4.
NOTE
• Check to see if the front and back registra-
tions in 12.2.1 to 12.2.4 are completed.
1.
From "MACHINE screen" in the user mode,
press the [Paper Set] key.
2.
Press the [Tray Setting] key.
12. ADJUSTMENT FOR POD
3. Press the tray key you want to adjust, and then
press the [Change] key.
4. Press the [Both Sides Adj.] key.
519
2