Konica Minolta bizhub PRO 1050 Service Manual page 487

Field Service Ver3.0 Nov.2006
Step
When using the phone line modem
13 DIPSW setting for the CS Remote Care
(Enter the No. code → Detail setting → Software
SW setting)
(Baud rate setting: Select the baud rate at the
software DIPSW setting 01-4 to 7.)
14 Turn on and off the power switch (SW2) of the main body.
15 First call execution
(Service mode → 09 CS Remote Care → 01 CS
Remote Care → Press No. Code twice → Detail
setting → 01 Basic setting → First call*)
* When the connection to the center completes
successfully, the CS Remote Care setting screen
is displayed.
Operation
When using the E-mail
Main body NIC
Proceed to the step 14.
Initial connection mail
reception
The initial connection
mail is sent to the mail
address of the main
body NIC from the cen-
ter.
* When the CS Remote
Care related screen is
opened while receiving
the initial connection
mail from the center, the
information being cre-
ated is destroyed and
the CS Remote Care
setting screen is dis-
played.
10. SERVICE MODE
Controller NIC
Initial connection mail
reception
The initial connection
mail is sent to the mail
address of the controller
NIC from the center.
* When the CS Remote
Care related window is
opened while receiving
the initial connection
mail from the center, the
information being cre-
ated is destroyed and
the CS Remote Care
setting screen is dis-
played.
453